Medical components, especially implants, are one of the fastest growing segments in the processing of small to medium-sized precision Titan components. This is because the proportion of people over 65, who make up the largest share of the ma....
When high-speed milling of TC4, Gc.2, and pure titanium integral structures, down-milling is generally used. The tool slowly cuts into the titanium workpiece to reduce the heat generated and reduce the radial force. When milling titanium all....
The special properties of titanium alloys make it more and more widely used. High strength/weight ratio, excellent toughness and excellent corrosion resistance. The titanium alloy can be used to make medical human implants, racing parts, shi....
The drilling is semi-closed cutting. The cutting temperature is very high in the process of drilling titanium alloy, the rebound after drilling is large, the drill chips are long and thin, easy to stick and not easy to discharge. Drilling of....
When titanium alloy is milled at low speed in an inert gas medium, the milling deformation coefficient is greater than 1.0; But in the atmosphere, when the milling speed Vc=30 m/min, the chip deformation coefficient is less than 1.0. This is....
In the process of CNC turning and milling titanium alloy, the matters that should be paid attention to are: (1) Due to the small modulus of elasticity of titanium alloy, the clamping deformation and force deformation of the workpiece during....
Set the geometric parameters of turning and milling titanium tools to improve the product quality of titanium alloy parts. Products are delivered quickly and on time. (1) The rake angle of the tool 0: The contact length between titanium allo....
CNC machining of titanium alloys should start from two aspects: reducing cutting temperature and reducing adhesion. Select tool materials with high thermal hardness, high bending strength, good thermal conductivity, and poor affinity with ti....
Turning and milling are particularly difficult when the hardness of titanium alloy is greater than HB350. When the hardness of titanium is less than HB300, the sticking phenomenon is likely to occur, and it is also difficult to cnc cutting.....
Titanium alloy has high strength, high fracture toughness, good corrosion resistance and weldability. Because it is more difficult to process than ordinary alloy steel, titanium alloys are generally considered to be difficult to process mate....