Tag Archives: Stainless steel parts

Stainless steel materials have high toughness, high thermal strength and low thermal conductivity. During milling and turning, the plastic deformation is large, the work hardening is serious, the cutting heat is too much, and the heat dissipation is difficult. This results in high cutting temperature at the tool tip, severe chip adhesion to the cutting edge, and prone to buildup of chip edges, which not only aggravates the wear of the tool, but also affects the surface roughness of the machined surface. In addition, since the chips are not easy to curl and break, it will damage the processed surface and affect the quality of the workpiece. In order to improve the processing efficiency and the quality of the workpiece, how to correctly select the tool material, the geometric parameters of the turning tool and the milling amount are introduced as follows:

What is a nozzle? CNC Machining technology of the nozzle
The nozzle is designed to work under a variety of different spray conditions, so choose the nozzle that suits your needs in order to achieve the best spray performance in use. The characteristics of the nozzle are mainly reflected in the spray type of the nozzle, that is, the shape formed when the liquid leaves the nozzle mouth and its running performance. The name of the nozzle is based on the spray shape divided into fan, cone, liquid column flow (ie jet), air atomization, and flat nozzle. Among them, the cone nozzle is divided into two categories: hollow cone and solid cone; Nozzle is a very key component in many kinds of spraying, oil spraying, sandblasting and other equipment, and it plays an important role.