Turning and milling miniature precision watches, mobile phone parts
16 May
cnc turning technology, milling technology, Stainless steel parts

Development of micro-turning and milling parts

In recent years, civil defense and other fields demand for a variety of CNC machining miniaturization of products continues to increase, the function of the tiny devices, the complexity of the structure, reliability requirements are also increasing. Therefore, it is of great significance to research and develop micro-machining technologies that are economically feasible, capable of processing three-dimensional geometric shapes and diversified materials, and feature sizes ranging from micrometers to millimeters. At present, micro-cutting has become an important technology to overcome the limitations of MEMS technology.

Continue reading

Micro CNC machining parts technology
16 May
cnc turning technology, milling technology

Super finishing of turning and milling micro parts

The micro CNC machining technology adopts a fully automatic method to super-finish the surface of metal parts. Through a kind of mechanochemical action, the material of 1-40μm on the surface of the metal parts is removed, and the surface quality of the processed surface reaches or is better than the N1 level of the ISO standard. Micro CNC machining technology is mainly used in the two fields of ultra-precision polishing and ultra-precision brightening.

Continue reading

CNC high-speed milling of titanium alloy parts
10 May
Machining titanium technology, milling technology

High-speed CNC machining of titanium alloy parts

In milling, an important characteristic of titanium alloys is extremely poor thermal conductivity. Due to the high strength and low thermal conductivity of titanium alloy materials, extremely high cutting heat (up to 1200°C if not controlled) is generated during processing. The heat is not discharged with the chips or absorbed by the workpiece, but is concentrated on the CNC cutting edge. Such high heat will greatly shorten tool life.

Continue reading

Titanium alloy implant parts
10 May
Machining titanium technology

How to choose the tool material for CNC machining of titanium?

CNC machining of titanium alloys should start from two aspects: reducing cutting temperature and reducing adhesion. Select tool materials with high thermal hardness, high bending strength, good thermal conductivity, and poor affinity with titanium alloys. YG cemented carbide is more suitable. Due to the poor heat resistance of high-speed steel, tools made of cemented carbide should be used as much as possible. Commonly used cemented carbide tool materials include YG8, YG3, YG6X, YG6A, 813, 643, YS2T and YD15.

Continue reading

CNC turning of precision stainless steel parts
10 May
Machining titanium technology

Set tool parameters for CNC machining titanium

Set the geometric parameters of turning and milling titanium tools to improve the product quality of titanium alloy parts. Products are delivered quickly and on time.
(1) The rake angle of the tool γ0: The contact length between titanium alloy chips and the rake face is short. When the rake angle is small, the contact area of the chip can be increased, so that the cutting heat and cutting force are not excessively concentrated near the cutting edge. Improve the heat dissipation conditions, and can strengthen the cutting edge and reduce the possibility of chipping. Turning titanium generally takes γ0=5°～15°.

Continue reading